Your cart is empty
Allpa thermomagnetic fuse 135A
- Compact compass for construction - Removable by optional mounting plate - Ideal for small sports boats - Roses Ø 65 mm - 5° rose scaling.
Teak coated wood of high quality Solid teak edges a practical solution for the cockpit dining area
Anchor line polyester braided - 30m length
- Works completely trouble-free - All electrical contacts are located outside the bilge in a dry environment - When the water level rises in the bell, air pressure is generated in the connecting hose and acts as a remote switch for the mem …
- Semi-circular head with cross recess - Niro - Aisi 304 - DIN 7981. -Price for 100 pieces pack
- Seajet dilution U is turpentine-based - Suitable for all one-component SEAJET paints and coatings, such as: SEAJET paint paint and SEAJET clear coat - Normally no more than 5% thinner should be added to the paint.
- Provides a clean finish and protects the fabric edge - Material: Stamoid light - Cut at a 45° angle and folded at high temperature.
- Pre-drilled stainless steel strip - Rail length max. 3 meters.
Ideal for water skiing and JET skis; Covers the waist and back and offers a high level of comfort; Equipped with a strap closure and a plastic zipper; Adjustable end and top ropes for optimal fit; Made from materials tested according to IS …
Wax-based rust inhibitor for preserving all metals and stainless steel Temporary paint protection possible Protective wax forms a firmly adhering, water-repellent film with very good corrosion protection Does not attack paintwork, anodized …
High-performance foot pump Inflation connections available for the most common valves Capacity: 5 liters
The Allroundmarin Scout 180 is a super-light trunk boat with a carbon slatted floor , ideal for quick deployment or transport on a barrow. It is perfectly suited for precise baiting or placing rigs in smaller waters. Anglers looking for a minimal pack size and low weight will love this model.
- This inexpensive inflatable boat seat is made of a sturdy PVC hose with a comfortable coating on the seat - Easy installation by clamping between the inflatable boat hoses. - Maximum filling: 0.1 bar Dimensions 94 cm Variation: Total hei …
Suitable for the following motor/gearbox types: Bravo I/II/III This replacement part replaces the following part numbers: 76868A1 76868A2
Original Suzuki Marine Spark Plug NGK BR8HS suitable for various outboard engines. Alternative Part Number: 0948200230000
Suitable for the following Volvo Penta engine/transmission types:V8-350-C-R V8-350-CE-R V8-380-C-R V8-380-CE-R V8-430-C-R V6-200-N V6-200-C-N V6-200-CE-N V6-240-M V6-240-C-M V6-240-CE-M V6-280-M V6-280-C-M V6-280-CE-M V8-300-C-M V8-300-CE- …
- The exhaust damper in the exhaust system reduces noise emissions by swirling the coolant - Only minimal resistance for the exhaust gases - Versions for hose Ø 40 / 45 / 50 / 60.
- High-quality oil for powerful engines - High protection against corrosion - Specifications: API Service Classifications; CI, CH-4, CG-4, CF-4, CF, CE, CD/SJ, SH and EC; VOLVO VDS.
- Flagstick holder for installation - Mounting with countersunk screw - Visible surfaces polished -Stainless steel.
Flagstick Ø: 25mm
Be the first to review this product.
No reviews yet.
No questions yet.
- Flagstick holder for railing tube (Ø 20 to 25 mm) - Chrome-plated brass - with knurled screw to secure the flagstaff.
- Installation of flagstick holder - Niro AISI316, polished - oval shape, base 60 x 45 mm.
- Chrome-plated brass - 10° inclined - With knurled screw to secure the flagstick - 3-hole mounting. Version: 10° inclined
- Type "Teak" (conical) requires a separate flagstick holder - Type "chrome-plated brass" (inclined) is for deck mounting, incl. bracket - Type "PVC" incl.
- Anodized aluminum - 10° inclined - With knurled screw to secure the flagstick - 4-hole mounting. Version: 10° inclined Material: Anodized aluminum
- Flagstick Niro AISI 316 - Polished surface - Type 1: with bayonet fitting and adjustable ring for flag mounting - Type 2: with ball head and eyelet for flag mounting.
- Ideal flagstick holder for the railing - Also suitable for transom mounting - Mounting plate with 8 holes - Mounting with 2 plastic clamps (screwed to the railing tube) - Niro Aisi 316 - with plastic can in the holder.
We will notify you by email when this item is back in stock.
You can unsubscribe from this notification at any time. Your email address will only be used for this notification.
Deutsch