Your cart is empty
JAMBO ANCHOR® This sets it apart from other anchors: Widely spaced flukes (1) prevent this Anchor tips to one side.
- With highly reflective material on the wind vanes and indicators - high-quality storage.
Classic parasol • easy mounting on any common winch • additional deck holder (optional) • mounting with adjustable railing bracket for 25 mm tube.
"DF200ATL DF200ATX DF200AZX Gewicht: L 235g X 240 kg Schaftlänge: L- 508 cm x – 635 cm Propellersteigung: 15“-27,5“(RR) 17“-26“ (CR) Farbe: Schwarz (opt. weiß) Hubraum: 2867 cc Leistung (kw/ PS): 147,7/200 Bohrung x Hub: 97 x 97 Schaltung …
- Blue/red, cropped vest with good value for money - Closed by a side zipper - In addition to the elastic waistband, there is an adjustable Velcro waistband on both sides - There is a flat pocket on the front - High wearing comfort due to …
- Sphaera is the result of Italian creativity and professionalism - In three work steps, a robust rubbing strip with a good appearance is produced - Easy installation - Rod length of the stainless steel insert max.
- Works completely trouble-free - All electrical contacts are located outside the bilge in a dry environment - When the water level rises in the bell, air pressure is generated in the connecting hose and acts as a remote switch for the mem …
This Suzuki outboard engine series meets applicable European exhaust and noise emission standards and can be used on Lake Constance.
- Due to the sand filling, the ashtray adapts ideally to the ground. Colour: blue Height: 50mm Diameter: 100mm
- Combination set consisting of: sturdy tube, boat hook, deck brush and dweil -telescopic - Handle and tip made of PVC.
- Made of black plastic - High strength - Heat and cold resistant - Stainless steel bolts - Drill holes for 5 mm screws.
- For tensioning and fixing tarpaulins. Material: rubber Ring Ø: 50mm Diameter: 6.5mm
- Y-cable to connect 2 controls in series. The EX bow and stern thruster can be mounted and used on almost any boat with a length of 6 to 20 m, regardless of hull shape, type of propulsion and draught - EX is offered in several performance …
Wax-based rust inhibitor for preserving all metals and stainless steel Temporary paint protection possible Protective wax forms a firmly adhering, water-repellent film with very good corrosion protection Does not attack paintwork, anodized …
- Suitable for salt water.
Passend für diverse Volvo Penta Motor-/Getriebetypen Suitable for the following Volvo Penta engine/transmission types: D70CRC TD70CHC AD41P-B AD41B AD41D 740B D41 D41B D41D TMD100C TMD31A TD70CRC 501B 570A 572A 740A 430A 430B 431A 431B 432 …
Suitable for the following motor/gearbox types: 350 (4BBL) CRATE ENGINES - 350 (4BBL) Crate Inboard 5.0L, 350, 377 MAG MPI STERNDRIVE EC - 350 MAG MPI ALPHA/BRAVO EC 5.7/6.2L MPI INBOARD - 6.2L MPI HORIZON MIE 5.0, 350, 377 MAG MPI STERNDR …
YAMAHA SERVICE KIT F50/F60/T60 (05) + F115 (00-05) 100HRS (8M0222280)
- Messing verchromt - 10° geneigt - mit Rändelschraube zum Sichern des Flaggenstocks - 3-Loch Montage.
Ausführung: 10° schräg
Be the first to review this product.
No reviews yet.
No questions yet.
- Anodized aluminum - 10° inclined - With knurled screw to secure the flagstick - 4-hole mounting. Version: 10° inclined Material: Anodized aluminum
- Stable and shapely flagstick holder - AISI 316.
- Flagstick holder for installation - Mounting with countersunk screw - Visible surfaces polished -Stainless steel.
- Type "Teak" (conical) requires a separate flagstick holder - Type "chrome-plated brass" (inclined) is for deck mounting, incl. bracket - Type "PVC" incl.
- Installation of flagstick holder - Niro AISI316, polished - oval shape, base 60 x 45 mm.
- Flagstick Niro AISI 316 - Polished surface - Type 1: with bayonet fitting and adjustable ring for flag mounting - Type 2: with ball head and eyelet for flag mounting.
- Flagstick holder for railing tube (Ø 20 to 25 mm) - Chrome-plated brass - with knurled screw to secure the flagstaff.
- Ideal flagstick holder for the railing - Also suitable for transom mounting - Mounting plate with 8 holes - Mounting with 2 plastic clamps (screwed to the railing tube) - Niro Aisi 316 - with plastic can in the holder.
We will notify you by email when this item is back in stock.
You can unsubscribe from this notification at any time. Your email address will only be used for this notification.
Deutsch