Your cart is empty
JAMBO ANCHOR® This sets it apart from other anchors: Widely spaced flukes (1) prevent this Anchor tips to one side.
Allpa thermomagnetic fuse 135A
Enjoy the freedom to control your audio entertainment from anywhere on your boat - Whether you're fishing at the stern or just jumping into the water from the swim platform - with the ARX remote control, audio control is possible anytime …
DF100CT Weight: CTL 188 kg CTX 192 kg Shaft length: L- 508 cm x – 635 cm Propeller pitch: 15-25" (RR) Color: Black Displacement: 2045 cc Power (kW/HP): 73.6 / 100 Bore x Stroke: 86 x 88 Shift: Mechanical Trim and Tilt Adjustments: Power Tr …
- Cooling unit and evaporator as a package - Power consumption approx. 35 W - Cold room: max. 100 L at 50 mm PU with L-evaporator, max.
Anchor line polyester braided - 30m length
- Robust hand slider Y-valve - e.g. for switching the emptying of wastewater into tanks or lakes. Hose Ø: 38mm
- Ball and spring made of stainless steel - Components made of brass.
- Teak oil and sealant for long-lasting protection - restores the natural colour to the wood, with UV protection - without pigmentation - Very economical and waterproof - Child-safe, as it is saliva and sweat resistant (DIN 53160) - Easy t …
- The "eye-catcher" at the sailor's table - Solid cast brass - Stable. Material: Brass
- Self-locking snap fasteners with locking mechanism - High axial and shear force - Quick and easy release.
- Easy-to-install stainless fender baskets - Swivel adapter for attachment to the bow or stern basket - The side adapter holds the fender holders in place with each other - the adapters are not included in the scope of delivery of the bask …
Lightweight design for comfortable wear Fleece collar for extra coziness 3D cut for an optimal fit Integrated back padding for additional support in the water Signal-colored swim bladder for increased visibility Reflectors for good visibil …
Wax-based rust inhibitor for preserving all metals and stainless steel Temporary paint protection possible Protective wax forms a firmly adhering, water-repellent film with very good corrosion protection Does not attack paintwork, anodized …
High-pressure double-stroke hand pump Ideal for inflating SUPs and inflatable kayaks Pressure gauge with pressure display in bar and PSI Includes H3 bayonet adapter Aluminum shaft Extra-large pump body for faster inflation
High-pressure air floor light grey for Vario 320 light grey/red/green
- Easy installation - Permanent mounting on the mirror - Rust-free due to the lightweight plastic construction - Maintenance-free - Self-lubricating - Maximum load of 200kg.
Suitable for the following motor/gearbox types: 5.0L,350 MAG,MX 6.2L MPI STERNDRIVE - MX 6.2L MPI HORIZON BRAVO 600 SCI - 600 SCi 250XS / 250 SPORTXS DFI (3.0L) - 250 Sport XS 8.1L INBOARD - 8.1L INBOARD (Base) 3.0L ALPHA ONE - 3.0L GM 181 …
Original Suzuki Marine oil filter for the outboard motors DF 4A / DF 5A / DF 6A, among others.
Suitable for the following Volvo Penta engine/transmission types: MMD11C MD11D MD17C MD17D
Deliberately designed to maximize top-end speed by reversing stall to reduce drag and widening the wingtips to improve stabilization in glide - Gets the boat planing faster - Saves fuel - Stabilizes the position of the boat during the jour …
- Suitable for salt water.
- Seajet dilution U is turpentine-based - Suitable for all one-component SEAJET paints and coatings, such as: SEAJET paint paint and SEAJET clear coat - Normally no more than 5% thinner should be added to the paint.
Content: 1000ml
Be the first to review this product.
No reviews yet.
No questions yet.
Dilution for the following products. HAZARD: H226, H312 + H332, H318, H315, H304, H335, H336, H373, H412 Content: 750ml
- Special thinner for setting the correct processing consistency and for cleaning equipment after processing Wilcken's epoxy paints - Add as a dilution additive only after mixing the two components.
- Seajet dilution A is suitable for antifoulings and one-component primers - such as: all SEAJET antifoulings, SEAJET Universal Primer, SEAJET 012 - Normally no more than 5% thinner should be added to the paint.
- Special thinner to set the correct processing consistency and clean the equipment for all 1-component products.
- Seajet thinner E is for all epoxy-based paints - such as: SEAJET 017 and SEAJET 117 - Normally no more than 5% thinner should be added to the paint.
- Special thinner for setting the correct processing consistency and for device cleaning of DD hard paint and polyurethane paints - Add as a dilution additive only after mixing the two components.
- Made of closed-cell PE foam -weatherproof - With mounting holes at all four corners - Can also be used as a seat pad.
We will notify you by email when this item is back in stock.
You can unsubscribe from this notification at any time. Your email address will only be used for this notification.
Deutsch