Your cart is empty
Allpa thermomagnetic fuse 135A
- With highly reflective material on the wind vanes and indicators - high-quality storage.
"DF20A Tiller Weight: Tiller: S- 48 kg L- 49 kg Shaft length: S- 381 cm L- 508 cm Propeller pitch: S & L 12“ (optional 5”-12") Color: Black Displacement: 327 cc Power (kW/hp): 14.7 / 20 Bore x stroke: 60.4 x 57 Gearshift: Mechanical Trim a …
- GISA TEX Dryweave 10 is an underventilation mat that prevents moisture build-up under the upholstery - The three-dimensional spacer fabric is placed between the upholstery and the upholstery support surface and prevents the formation of …
- Robust hand slider Y-valve - e.g. for switching the emptying of wastewater into tanks or lakes. Hose Ø: 38mm
- Countersunk lens head with cross recess - Niro - Aisi 304 - DIN 7983.
- Removes dirt and stains from boat and sail covers, bimini tops, etc. - Can be used on all materials - Simply pipe on and rub dry.
- Due to the sand filling, the ashtray adapts ideally to the ground. Colour: blue Height: 50mm Diameter: 100mm
- For tensioning and fixing tarpaulins. Material: rubber Ring Ø: 50mm Diameter: 6.5mm
- Easy-to-install stainless fender baskets - Swivel adapter for attachment to the bow or stern basket - The side adapter holds the fender holders in place with each other - the adapters are not included in the scope of delivery of the bask …
Certified according to EN ISO 12402-4, EN ISO 12402-7 and EN ISO 12402-9 according to Directive 2016/425/EEC for recreational craft Designed for people who have to wait for rescue in protected waters Equipped with 30 mm wide waist strap, 1 …
Wax-based rust inhibitor for preserving all metals and stainless steel Temporary paint protection possible Protective wax forms a firmly adhering, water-repellent film with very good corrosion protection Does not attack paintwork, anodized …
Ideal for tubes and other small or medium-sized inflatable products Pressure up to 0.58 psi (= 0.04 bar) 420 l/min air flow, 80 watts, DC12V Size 9.5x7.7x13 cm Includes 12V cigarette lighter plug Built-in NI-MH battery 1300mA Accessories …
The Allroundmarin Scout 240 with high-pressure air floor is the ideal middle ground between space and compactness for medium-sized waters. Thanks to the air keel, it steers precisely and offers enough room for tackle and sonar with its wide bow. This model is perfect for anglers who value flexibility and are looking for a boat that is easy to handle alone.
Suitable for the following motor/gearbox types: 210 CARB M2 JET DRIVE - 210 CARB M2 JET DRIVE (POWERHEAD) FORCE 120 hp - 120 H.P. (1997) 850/1025/1075/1200 SCI - 1075 SCi 135/150/175/200 XR6 MAGNUM III 105-140 JET - V-175 135/140/150/200/X …
YAMAHA SERVICE KIT F75/F90 (16&NEWER) + F80B/VF90 (ALL YEARS) + F115 (06&NEWER) 100HRS (8M0222222)
Suitable for the following Volvo Penta engines/transmissions 3.0GLM-A 3.0GLM-B 3.0GLM-C 3.0GLMMDA 3.0GLP-A 3.0GLP-B 3.0GLP-C 3.0GLP-D 3.0GLP-E 3.0GLP-J 3.0GLP-N 3.0GSM-A 3.0GSM-B 3.0GSMBYMCE 3.0GSM-C 3.0GSMLKD 3.0GSMNCS 3.0GSMWTR 3.0GSP-A …
Stainless steel immersion tube sensor for fuel 10-180 OHM measuring range
- Suitable for salt water - Manufacturer: Tecnoseal
- Fiberglass mat: Reinforcement mat for the production of laminates in combination with polyester resin - Fine glass fabric mat: light fabric, easy to work with and low additional weight - Glass mesh mat coarse: woven reinforcement mat with versatile use on boats.
Be the first to review this product.
No reviews yet.
No questions yet.
- The microfibre filler MF is used as a reinforcement and thickening additive - Makes a universally applicable adhesive - The microfibre filler offers good gap filling - Add between 4-18% by weight to the epoxy mixture.
- The universal tinting concentrate does not contain any binders, so it cannot be used pure - Shake vigorously before use and keep the bottle closed after removal - Largely frost and heat resistant - Color: Black - Contains 20ml
- 2-component epoxy filler with mixed fibers - For processing deep unevenness and adhesions of GRP, CFRP, steel, aluminium and hardwood - Suitable for all applications where mechanical strength, high strength and excellent water resistance …
- Epoxy resin with fast (pot life: approx. 15 min at 21° C) or slow (pot life: approx. 30 min at 21° C) hardener - Can be used for the majority of jobs and at lower temperatures - Curing at room temperature - Yields a high-strength, moistu …
- The filler mixture FB is ideal for filling - Blends well with the epoxy mixture and results in a smooth filler surface that is easy to sand - Add between 35-60% by weight to the epoxy mixture.
- 2-component polyester resin, hardener and glass mat in a matching set for easy repair of damage and leaks to GRP laminates.
- 2-component epoxy lightweight filler. Strong adhesion, resistant to water and good sandability - for all repairs in the surface and underwater area.
- Polyester gelcoat filler for repairing damage (scuffs, cracks, scratches, chippings) or holes) in the gelcoat in the above and underwater areas.
We will notify you by email when this item is back in stock.
You can unsubscribe from this notification at any time. Your email address will only be used for this notification.
Deutsch