Your cart is empty
Allpa thermomagnetic fuse 135A
- Made of perlon fabric - Dimensions 30 x 20 cm - with loop and ribbon.
Weight: S- 13.5 kg L- 14 kg Shaft length: S- 381 cm L- 508 cm Propeller pitch: S & L 5 3/8" Color: Black Displacement: 68 cc Power (kW/hp): 1.8/2.5 Bore x stroke: 48 x 38 Gearshift: Mechanical Trim and tilt settings: Manual trim and tilt G …
- Thermoelectric cooler - Wear-free thermoelectrics (Peltier system) - Cold/heat transfer to the inside through coated aluminum container - Heat dissipation to the outside through collector-less, wear-free fan - TC special electronics: ele …
- Quietly running, electric on-board toilet with adjustable water level in the basin - 12 V - Odor trap - With magnetic switch - Connection to the on-board water supply if fresh water flushing is required - Hose connection E19 - A25/38.
- Foam roller with double groove. Design: for paint processing Material: Foam green Width: 110mm
- Made of flame-resistant, foamed, soft vinyl - Closed cells and homogeneous surface layer - No rotting, as moisture cannot penetrate the material - Therefore, no condensation on the walls.
- Pre-drilled stainless steel strip - Rail length max. 3 meters.
- Replacement cartridge set for Halkey Robert euro vending machines.
Wax-based rust inhibitor for preserving all metals and stainless steel Temporary paint protection possible Protective wax forms a firmly adhering, water-repellent film with very good corrosion protection Does not attack paintwork, anodized …
- Electric air pump - max. pressure 1 bar (inflate and suction) - incl. universal adapter - Alligator clips with cable (3 m) for 12 V - Air hose approx.
The Allroundmarin Xtream 335 with aluminum floor is an indestructible platform for expeditions and the heaviest operations in any weather. The solid floor offers unsurpassed stability and protection, while the huge interior easily accommodates all your equipment. This model is built for professionals who demand absolute reliability and maximum space on large lakes and rivers.
Mounting screw for Mercruiser starter engine. Suitable for the following motor/gearbox types: 2.5L 120hp 4-cylinder 3.0L 140hp 4-cylinder 3.8L V6 4.3L V6 5.0L V8 305 5.7L V8 350 5.8L V8 7.4L
YAMAHA SERVICE KIT F75/F90 (16&NEWER) + F80B/VF90 (ALL YEARS) + F115 (06&NEWER) 100HRS (8M0222222)
Suitable for the following Volvo Penta engines/transmissions 7.4GiPBYCCE 7.4GiPWTR 7.4GSiPBYCCE 7.4GSiPWTR 3.0GSMBYMCE 8.2GSiPBYCCE 8.2GSiPWTR DPX415XEFS DPX385XBYDCE DPX385XEFS DPX415XBYDCE
- Tempering aid in all weather conditions - Suitable for gasoline and diesel engines. Content: 200ml
- You can find the right impeller for you from the following list: Comparison or selection table for original spare part numbers (type corresponds to article no.).
- White, one-component nitro resin putty - For filling and repairing small holes, cracks and scratches - Suitable for gelcoat, plastics, wood and metal - Quick repairs without overpainting - Fast-curing, sandable and paintable.
Colour: whiteContent: 70g
Be the first to review this product.
No reviews yet.
No questions yet.
- Micro-light filler containing microspheres - fills in indentations and is used to build surfaces - Can be well shaped and sanded - Add between 7-16% by weight to the epoxy mixture.
- For repairing damage to the outer skin, such as scratches, scrapes, hairline cracks and bubbles, as well as for covering polyester laminate - Very resistant to UV light, aging and weathering.
- Glass fabric for laminates with good transparency - Suitable for polyester and epoxy resin.
- Fiberglass mat: Reinforcement mat for the production of laminates in combination with polyester resin - Fine glass fabric mat: light fabric, easy to work with and low additional weight - Glass mesh mat coarse: woven reinforcement mat wit …
- 2-component polyester filler with good filling capacity - Fast-curing and easy to grind - Very suitable for levelling out larger damaged areas on GRP, wood or metal substrates - Hardens with 2% hardener paste.
- The filler mixture FB is ideal for filling - Blends well with the epoxy mixture and results in a smooth filler surface that is easy to sand - Add between 35-60% by weight to the epoxy mixture.
- 2-component epoxy filler with mixed fibers - For processing deep unevenness and adhesions of GRP, CFRP, steel, aluminium and hardwood - Suitable for all applications where mechanical strength, high strength and excellent water resistance …
We will notify you by email when this item is back in stock.
You can unsubscribe from this notification at any time. Your email address will only be used for this notification.
Deutsch