Your cart is empty
Allpa thermomagnetic fuse 135A
- Wind indicator for shrouds, backstay, etc. at visual height - is simply threaded onto the shrouds - Easy assembly and disassembly - approx.
DF60A T Weight: ATL 104 kg AVTL 115 kg Shaft length: L- 508 cm Propeller pitch: 9“-17” Color: Black (opt. white) Displacement: 941 cc Power (kW/hp): 44.1 / 60 Bore x stroke: 72.5 x 76 Gearbox: Mechanical Trim and tilt settings: Power Trim …
16-piece boat tableware set High-quality outdoor tableware made from high-quality melamine 4 deep plates with a diameter of 21 cm 4 flat plates with a diameter of 20 cm 4 flat plates with a diameter of 25 cm 4 cups with 30cl capacity
"Aqua Kem Green Concentrate Reduces odor and gas formation by stimulating biological processes in the toilet's wastewater tank Aqua Kem Green achieves its best results with four days of use and has a pleasant citrus scent is not subject to …
- Removes light scratches from acrylic, polycarbonate and other plastic surfaces - Dissolves salt deposits and stains - Ideal for windshields and hatch covers - Work in transversely to the "scratch" and polish - Use with "Plastic Polish Re …
Doormat with anti-slip coating. Material: 100% latex and polyester.
- Keder profile with and without nose - Installation by drilling/screwing - Material: aluminum - Max. profile length 6 m - Ø 7 mm of the guide groove.
-Inflatable - with valve - Made of white, signal red or yellow PVC
- Replacement cartridge set for United Moulders vending machines.
Wax-based rust inhibitor for preserving all metals and stainless steel Temporary paint protection possible Protective wax forms a firmly adhering, water-repellent film with very good corrosion protection Does not attack paintwork, anodized …
This sun canopy is packed with great features: The four-arch structure offers a coverage area of over 7 square metres at its largest Half the weight of the stainless steel product, but with the same strength and durability The epoxy coatin …
The Allroundmarin Airstar 200 is an extremely lightweight and compact inflatable boat with a high-pressure air floor. With a weight of only 15.65 kg including accessories, it is perfect as a tender, for quick crossing, or as an uncomplicated leisure boat for solo trips.
- Easy installation - Permanent mounting on the mirror - Rust-free due to the lightweight plastic construction - Maintenance-free - Self-lubricating - Maximum load of 200kg.
Original Suzuki Marine Spark Plug NGK DCPR6E suitable for various outboard engines. Alternative Part Number: 0948200446000
Suitable for the following Volvo Penta engine/transmission types: D3-110I-B D3-110I-C D3-130I-C TAD1346GE TAD840GE TAD1380-82GE TAD841-43GE MD100A MD100B TMD100A AQ130C AQD70B AQD70BL TMD70C 100S 110S MD40A TMD40A TMD40B TMD40C AD30A AD40B …
- Suitable for salt water.
- The filler CS contains colloidal silica and is suitable for thickening the epoxy resin when working on vertical surfaces or overhead work - This versatile filler can be used well in conjunction with other fillers - Add between 3-6% by weight to the epoxy mixture.
Colour: white-greyContent: 20g
Be the first to review this product.
No reviews yet.
No questions yet.
- 2-component polyester resin, hardener and glass mat in a matching set for easy repair of damage and leaks to GRP laminates.
Polyester gelcoat filler for repairing damage (scratches, cracks, scratches, chips, or holes) in gelcoat above and below water.
- Fiberglass mat: Reinforcement mat for the production of laminates in combination with polyester resin - Fine glass fabric mat: light fabric, easy to work with and low additional weight - Glass mesh mat coarse: woven reinforcement mat wit …
- The microfibre filler MF is used as a reinforcement and thickening additive - Makes a universally applicable adhesive - The microfibre filler offers good gap filling - Add between 4-18% by weight to the epoxy mixture.
- The filler mixture FB is ideal for filling - Blends well with the epoxy mixture and results in a smooth filler surface that is easy to sand - Add between 35-60% by weight to the epoxy mixture.
- 2-component polyester glass fibre filler for more highly stressed backfilling and repair of minor laminate damage - Very good adhesion properties to metal, GRP and wood.
- Epoxy resin with fast (pot life: approx. 15 min at 21° C) or slow (pot life: approx. 30 min at 21° C) hardener - Can be used for the majority of jobs and at lower temperatures - Curing at room temperature - Yields a high-strength, moistu …
- 2-component polyester filler with good filling capacity - Fast-curing and easy to grind - Very suitable for levelling out larger damaged areas on GRP, wood or metal substrates - Hardens with 2% hardener paste.
We will notify you by email when this item is back in stock.
You can unsubscribe from this notification at any time. Your email address will only be used for this notification.
Deutsch