Your cart is empty
Allpa thermomagnetic fuse 135A
- The Skywatch BL is a complete weather station that is paired with your smartphone via Bluetooth - Depending on the device, many different values can be called up - Wind data, temperature, humidity, barometric pressure and UV index - Swis …
"DF40A T Weight: ATS: 102 kg ATL 104 kg Shaft length: S- 381 cm L- 508 cm Propeller pitch: 9“-17” Color: Black (opt. white) Displacement: 941 cc Power (kW/hp): 29.4 / 40 Bore x stroke: 72.5 x 76 Gearbox: Mechanical Trim and tilt settings …
"Rechargeable lithium-ion battery E-Pack 15 Powers Polarys Freeze DZ and Portafreeze compressor cool boxes on the go Ideal when no conventional power supply is available Cool box contents are kept cold for up to 8 hours, depending on the c …
- Particularly quiet - up to 2 meters self-priming - Complete with dirt filter - 12 V. Hose Ø: 19mm Flow rate: 14.4l/min
- Permanently maintains and protects inflatable SUP boards against UV rays, weathering, chalking and fading - Suitable for all flexible materials, such as PVC - Removes light dirt - can increase the lifespan and improve the appearance.
- The "eye-catcher" at the sailor's table - Solid cast brass - Stable. Material: Brass
- Tool variants that enable easy assembly of the LOXX buttons. Material: nickel-plated steel
- Sphaera is the result of Italian creativity and professionalism - In three work steps, a robust rubbing strip with a good appearance is produced - Easy installation - Rod length of the stainless steel insert max.
- Certified according to ISO 12401 - 150N buoyancy - Cover with Velcro fastener, ergonomic shape - Comfortable to wear due to the optimized weight distribution - Leg strap - fleece-lined collar - Reflective piping on the front.
Wax-based rust inhibitor for preserving all metals and stainless steel Temporary paint protection possible Protective wax forms a firmly adhering, water-repellent film with very good corrosion protection Does not attack paintwork, anodized …
High-performance foot pump Inflation connections available for the most common valves Capacity: 5 liters
The Allroundmarin Belly Boat Carbon PRO 170 is a high-end model in which you sit extra high and dry. The cool carbon look makes it an eye-catcher, while Railblaza mounts offer you full flexibility when mounting accessories. It is made for Belly Boat pros and demanding beginners who value quality and design.
Mercruiser/Mercury/Quicksilver Fitting/Hose Connector/Fuel Hose Connector made of brass 1/4 Inch Thread - 5/16 Inch (8mm) Hose (22-89771Q2)
Volvo Penta gasoline/fuel pump (23306461)
- Pre-assembled cable harnesses for easy installation - 4-wire cable as control cable between panel and bow/stern thruster or automatic main switch and bow/stern thruster - 5-wire cable as a control cable between the panel and the automati …
- You can find the right impeller for you from the following list: Comparison or selection table for original spare part numbers (type corresponds to article no.).
- Special thinner for setting the correct processing consistency and for cleaning equipment after processing Wilcken's epoxy paints - Add as a dilution additive only after mixing the two components.
Content: 1000ml
Be the first to review this product.
No reviews yet.
No questions yet.
- Seajet dilution A is suitable for antifoulings and one-component primers - such as: all SEAJET antifoulings, SEAJET Universal Primer, SEAJET 012 - Normally no more than 5% thinner should be added to the paint.
Dilution for the following products. HAZARD: H226, H312 + H332, H318, H315, H304, H335, H336, H373, H412 Content: 750ml
- Special thinner to set the correct processing consistency and clean the equipment for all 1-component products.
- Special thinner for setting the correct processing consistency and for device cleaning of DD hard paint and polyurethane paints - Add as a dilution additive only after mixing the two components.
- Seajet dilution U is turpentine-based - Suitable for all one-component SEAJET paints and coatings, such as: SEAJET paint paint and SEAJET clear coat - Normally no more than 5% thinner should be added to the paint.
- Seajet thinner E is for all epoxy-based paints - such as: SEAJET 017 and SEAJET 117 - Normally no more than 5% thinner should be added to the paint.
- Buoyancy aid certified according to ISO 12402-5 - 50 Newton buoyancy - Easy to adjust with hip belt and lacing - Robust zipper - Optimal hold due to elastic side panels - Extremely soft PE foam for flexibility and comfort - Made of robus …
We will notify you by email when this item is back in stock.
You can unsubscribe from this notification at any time. Your email address will only be used for this notification.
Deutsch