Your cart is empty
Allpa thermomagnetic fuse 135A
- Made of sturdy, blue plastic with hanging eyelets and Velcro fastener - for self-assembly. Dimensions: 340x230mm
DF70A T Weight: ATL 156 kg Shaft length: L- 508 cm Propeller pitch: 13“-25” (RR) Color: Black (opt. white) Displacement: 941 cc Power (kW/hp): 51.5 / 70 Bore x stroke: 72.5 x 85 Transmission: Mechanical Trim and tilt settings: Power Trim & …
- Clutch lock incl. discus lock. Material: Galvanized steel
- To significantly increase the grilling pleasure, we offer a wide range of accessories.
Anchor line polyester braided - 30m length
- Particularly fast dissolving and soft - Prevents blockages in the toilet and sewage system - Ideal for all pump and caravan toilets -two-part - 4 rolls of 250 sheets.
Hinge with mirrored cover
- The ultimate protection for plastics, gelcoats and painted surfaces - Lasts much longer than conventional waxes and contains no abrasives - Prevents dirt deposits on the hull and underwater hull and can thus increase boat speed - Special …
- Ideal for high-quality sun and privacy protection - The mesh fabric allows sufficient light to pass through (45%) while offering protection (65%) - Material: scrim 295 g/m² - Tear strength: 199/200 N/50mm - Color: royal blue, pearl gray …
- Replacement cartridge set for United Moulders vending machines.
- Secure stand on the boat - Ribbed rubber insert -Color: black (image differs from the original) Dimensions: 230x80mm
Wax-based rust inhibitor for preserving all metals and stainless steel Temporary paint protection possible Protective wax forms a firmly adhering, water-repellent film with very good corrosion protection Does not attack paintwork, anodized …
High-pressure double-stroke hand pump Ideal for inflating SUPs and inflatable kayaks Pressure gauge with pressure display in bar and PSI Includes H3 bayonet adapter Aluminum shaft Extra-large pump body for faster inflation
The Allroundmarin Xtream 305 with aluminum floor is a workhorse for large waters and offers you maximum torsional stiffness when fully loaded. With a 90 cm interior width , you have extremely much space for tackle and enjoy a secure stance during the fight or when loading. This model is designed for anglers who prioritize robustness above all else and need to safely transport a lot of material.
Suitable for the following models: 850 SCI - 850 SCi 850/1025/1075/1200 SCI - 1075 SCi 1075 SCI - 1075 SCi 850/1025/1075/1200 SCI - 1025SCi 850/1025/1075/1200 SCI - 1200 SCi 1200 SCI - 1200 SCi 850/1025/1075/1200 SCI - 850 SCi 850/1025/107 …
Suitable for the following Volvo Penta engine/transmission types: D3-110I-B D3-110I-C D3-130I-C D3-220I-G D3-130A-A D3-160A-A D3-130A-B D3-160A-B D3-130A-C D3-160A-C D3-140A-D D3-170A-D D3-200A-D D3-220A-D D3-140I-D D3-140A-E D3-170A-E D3- …
- Suitable for OMC (Johnson and Evinrude) and HONDA outboards up to type BF8B.
- Suitable for salt water.
- Ideal flagstick holder for the railing - Also suitable for transom mounting - Mounting plate with 8 holes - Mounting with 2 plastic clamps (screwed to the railing tube) - Niro Aisi 316 - with plastic can in the holder.
Flagstick Ø: 22-25mmVersion: 30° inclinedWeight: 200g
Be the first to review this product.
No reviews yet.
No questions yet.
- Flagstick holder for railing tube (Ø 20 to 25 mm) - Chrome-plated brass - with knurled screw to secure the flagstaff.
- Flagstick holder for installation - Mounting with countersunk screw - Visible surfaces polished -Stainless steel.
- Chrome-plated brass - 10° inclined - With knurled screw to secure the flagstick - 3-hole mounting. Version: 10° inclined
- Anodized aluminum - 10° inclined - With knurled screw to secure the flagstick - 4-hole mounting. Version: 10° inclined Material: Anodized aluminum
- Installation of flagstick holder - Niro AISI316, polished - oval shape, base 60 x 45 mm.
- Type "Teak" (conical) requires a separate flagstick holder - Type "chrome-plated brass" (inclined) is for deck mounting, incl. bracket - Type "PVC" incl.
- Flagstick Niro AISI 316 - Polished surface - Type 1: with bayonet fitting and adjustable ring for flag mounting - Type 2: with ball head and eyelet for flag mounting.
We will notify you by email when this item is back in stock.
You can unsubscribe from this notification at any time. Your email address will only be used for this notification.
Deutsch