Your cart is empty
Allpa thermomagnetic fuse 135A
"DF15A Remote Control Weight: Remote control S- 47 kg L- 48 kg ATL 45 kg Shaft length: S- 381 cm L- 508 cm Propeller pitch: S & L 10“ (optional 5”-12") Color: Black Displacement: 327 cc Power (kW/hp): 11 / 15 Bore x stroke: 60.4 x 57 Gears …
"Impressive cooling and freezing performance Two separately adjustable temperature zones (Dual Zone) Removable battery (optional) for use without a power supply Removable battery with a runtime of 4-24 hours Two internal compartments (Dual …
Anchor line polyester braided - 30m length
Connections: for 19 mm (¾") inlet hose, 25 mm (1") outlet hose Fuse size: 25 (amperes) Maximum current: 20 (amperes) Powerful centrifugal suction pump for shredding and evacuating waste Supplied with a separate pump for use with seawater/r …
Is a corrosion protection spray primer and an adhesive primer for various substrates - Dries quickly and has good adhesion to GRP, steel and other metals - Primer before antifouling on ship propellers and outboard engines, wedge markings a …
- The "eye-catcher" at the sailor's table - Solid cast brass - Stable. Material: Brass
- Fixed, spherical tarpaulin button - anodized aluminum - incl. screw for assembly - "residual thread" Ø 4 x 12 mm.
- Made of white plastic - Very easy adjustment of the line length with clip - Can be used for railing pipe and railing wire.
Manual release – blowable Certified according to ISO 12402-4 & 12402-6 for maximum safety on board Ultralight design specifically developed for the maritime market Reflective tapes and mouth blowers with check valve (20610, according to IS …
Wax-based rust inhibitor for preserving all metals and stainless steel Temporary paint protection possible Protective wax forms a firmly adhering, water-repellent film with very good corrosion protection Does not attack paintwork, anodized …
Ideal for tubes and other small or medium-sized inflatable products Pressure up to 0.58 psi (= 0.04 bar) 420 l/min air flow, 80 watts, DC12V Size 9.5x7.7x13 cm Includes 12V cigarette lighter plug Built-in NI-MH battery 1300mA Accessories …
The Allroundmarin Scout 270 , with its high-pressure air floor and extended length, offers even more space for equipment while maintaining easy handling. The wide bow and the air keel ensure safe driving characteristics even when waves arise. This model is aimed at anglers who need a little more legroom but do not want to give up a lightweight inflatable boat.
- Easy installation - Permanent mounting on the mirror - Rust-free due to the lightweight plastic construction - Maintenance-free - Self-lubricating - Maximum load of 200kg.
Set of 5 pieces Suitable for the following motor/gearbox types: BRAVO XR I - III SPORT MASTER - INTEGRATED TRANSOM BRAVO XR I - III SPORT MASTER - BRAVO XR ONE BRAVO I - II - III - BRAVO THREE BRAVO XR I - III SPORT MASTER - BRAVO XR SPORT …
Original Suzuki Marine fuel filter for the DF8-DF20 outboard engines, among others. Alternate Part Number: 1541098500000
Suitable for the following Volvo Penta engines/transmissions FWD-D2 OX SX-D FWD-D1 OX
- A stable and proven built-in model - Forward and reverse gear, throttle and idle with idle lock - Starboard and port side installation possible - Ideal for sailboats, as the small gear handle prevents sheets from getting stuck.
- Special 4-stroke outboard oil - For speeds up to 6,000 rpm. - Cleared by Sierra for Mercury, Mariner, Yamaha, Evinrude/Johnson, Honda and Suzuki outboards.
- Flagstick holder for railing tube (Ø 20 to 25 mm) - Chrome-plated brass - with knurled screw to secure the flagstaff.
Be the first to review this product.
No reviews yet.
No questions yet.
- Ideal flagstick holder for the railing - Also suitable for transom mounting - Mounting plate with 8 holes - Mounting with 2 plastic clamps (screwed to the railing tube) - Niro Aisi 316 - with plastic can in the holder.
- Flagstick holder for installation - Mounting with countersunk screw - Visible surfaces polished -Stainless steel.
- Type "Teak" (conical) requires a separate flagstick holder - Type "chrome-plated brass" (inclined) is for deck mounting, incl. bracket - Type "PVC" incl.
- Anodized aluminum - 10° inclined - With knurled screw to secure the flagstick - 4-hole mounting. Version: 10° inclined Material: Anodized aluminum
- Flagstick Niro AISI 316 - Polished surface - Type 1: with bayonet fitting and adjustable ring for flag mounting - Type 2: with ball head and eyelet for flag mounting.
- Stable and shapely flagstick holder - AISI 316.
- Installation of flagstick holder - Niro AISI316, polished - oval shape, base 60 x 45 mm.
We will notify you by email when this item is back in stock.
You can unsubscribe from this notification at any time. Your email address will only be used for this notification.
Deutsch