Your cart is empty
Allpa thermomagnetic fuse 135A
DF140BT & BZ Weight: 186 kg (L) x 190 kg (420 lbs) Shaft length: 508 cm (L) x 635 cm (250 ft) Propeller pitch: 15-25" (RR) 17-23" (CR) Color: Black (optional white) Displacement: 2045 cc Power (kW/HP): 103/140 Bore x Stroke: 86 x 88 Shift …
- Solid design with a frame made of 25 mm Ø aluminium tube - The white melamine table top is edged with an aluminium profile.
Anchor line polyester braided - 30m length
- Fecal chopper pump - Self-priming up to 0.6 meters. Hose Ø: E38-A25mm Flow rate: 45l/min
- For easy hooking or securing of doors - Chromed brass.
- Repair filler for the underwater and upstream areas - For repairing osmosis damage, waterproof - Excellent adhesion, layer thickness up to 10 mm - Easy to fill, easy to sand - Fills small unevenness and hairline cracks with primer, gelco …
- The "eye-catcher" at the sailor's table - Solid cast brass - Stable. Material: Brass
- 100% acrylic with polyurethane coating - Specification: rot-resistant, water-repellent, oil- and dirt-repellent, colorfast - Top with polyurethane coating - approx.
- With the Fastfender, you can hang the fender on the railing of the boat in no time at all - Putting on the fender is also easy to do with one hand - For 6 - 12mm rope Ø - Version: 32mm tube Length: 158mm
Manual release – blowable Certified according to ISO 12402-4 & 12402-6 for maximum safety on board Ultralight design specifically developed for the maritime market Reflective tapes and mouth blowers with check valve (20610, according to IS …
Wax-based rust inhibitor for preserving all metals and stainless steel Temporary paint protection possible Protective wax forms a firmly adhering, water-repellent film with very good corrosion protection Does not attack paintwork, anodized …
This sun canopy is packed with great features: The four-arch structure offers a coverage area of over 7 square metres at its largest Half the weight of the stainless steel product, but with the same strength and durability The epoxy coatin …
The Allroundmarin Kiwi 260 in light grey with a high-pressure air floor combines comfort and lightweight design in one agile boat. Perfect for spontaneous excursions and use as a tender, it is quickly inflated and offers you a non-slip, firmly insulating standing surface. Enjoy the effortless setup and safe driving on the water.
- This inexpensive inflatable boat seat is made of a sturdy PVC hose with a comfortable coating on the seat - Easy installation by clamping between the inflatable boat hoses. - Maximum filling: 0.1 bar Dimensions 94 cm Variation: Total hei …
Suitable for the following motors: Mercruiser V6 GM 262 4.3L carburetor, EFI & MPI 175 1987 (S/N 0B527955 - 0B773242) 185 (2bbl.) 1985-1986 (S/N 0A331455 - 0B527954) 4.3L 1988-1996 (S/N 0B773243 - 0F802999) 4.3L (Gen+) 1998-2002 (S/N 0L010 …
Impeller for Suzuki DF4-DF6/DT2/2.2/DT3.5/DT4/DT5/DT6/DT8, replaces OEM number 17461-98501/2/3
Suitable for the following Volvo Penta engine/gearbox types: D6-370A-C D6-350A-A D6-350A-B D6-330A-D D6-330D-E D6-370D-E D6-370D-B D6-330D-B D6-330A-F D6-370A-F D6-370D-A D6-330D-C D4-260A-B D4-260A-A D4-260A-C D4-260A-D D4-260A-E D4-260A- …
- Made of galvanized steel - Suitable for CC2300 and CC3300 cables.
- Special 4-stroke outboard oil - For speeds up to 6,000 rpm. - Cleared by Sierra for Mercury, Mariner, Yamaha, Evinrude/Johnson, Honda and Suzuki outboards.
- Polyester gelcoat filler for repairing damage (scuffs, cracks, scratches, chippings)or holes) in the gelcoat in the above and underwater areas.
With styrene: suitable for spraying,Styrene-free: suitable for painting or spot touch-ups
Be the first to review this product.
No reviews yet.
No questions yet.
- The HD filler mixture is ideally suited for high-strength bonding and filling - Very suitable for underlining deck accessories and can be used wherever large loads occur - Can also be used for filling and filling gaps - Add between 35-60 …
- The filler mixture FB is ideal for filling - Blends well with the epoxy mixture and results in a smooth filler surface that is easy to sand - Add between 35-60% by weight to the epoxy mixture.
- The microfibre filler MF is used as a reinforcement and thickening additive - Makes a universally applicable adhesive - The microfibre filler offers good gap filling - Add between 4-18% by weight to the epoxy mixture.
- 2-component polyester glass fibre filler for more highly stressed backfilling and repair of minor laminate damage - Very good adhesion properties to metal, GRP and wood.
Polyester gelcoat filler for repairing damage (scratches, cracks, scratches, chips, or holes) in gelcoat above and below water.
- Fiberglass mat: Reinforcement mat for the production of laminates in combination with polyester resin - Fine glass fabric mat: light fabric, easy to work with and low additional weight - Glass mesh mat coarse: woven reinforcement mat wit …
- For repairing damage to the outer skin, such as scratches, scrapes, hairline cracks and bubbles, as well as for covering polyester laminate - Very resistant to UV light, aging and weathering.
We will notify you by email when this item is back in stock.
You can unsubscribe from this notification at any time. Your email address will only be used for this notification.
Deutsch