Your cart is empty
JAMBO ANCHOR® This sets it apart from other anchors: Widely spaced flukes (1) prevent this Anchor tips to one side.
- Installation of flagstick holder - Niro AISI316, polished - oval shape, base 60 x 45 mm.
- Extremely smooth, with low rolling resistance - Ideal for permanent slipping - made of polyurethane. Shaft Ø: 16mm
Certified according to EN ISO 12402-4, EN ISO 12402-7 and EN ISO 12402-9 according to Directive 2016/425/EEC for recreational craft Designed for people who have to wait for rescue in protected waters Equipped with 30 mm wide waist strap, 1 …
"Portable bucket toilet with seat, lid, and carrying handle Robust and stable plastic construction Compact and easy to transport Practical and convenient solution for outdoor use and camping Capacity: 23.5L"
- Shapely and very stable design with a frame made of 25 mm Ø aluminium tube - Lacquered hardwood armrests - Seat and backrest are made of sturdy cotton fabric.
- Due to the sand filling, the ashtray adapts ideally to the ground. Colour: blue Height: 50mm Diameter: 100mm
- Seajet thinner E is for all epoxy-based paints - such as: SEAJET 017 and SEAJET 117 - Normally no more than 5% thinner should be added to the paint.
- Made of black plastic - High strength - Heat and cold resistant - Stainless steel bolts - Drill holes for 5 mm screws.
- For tensioning and fixing tarpaulins. Material: rubber Ring Ø: 50mm Diameter: 6.5mm
Wax-based rust inhibitor for preserving all metals and stainless steel Temporary paint protection possible Protective wax forms a firmly adhering, water-repellent film with very good corrosion protection Does not attack paintwork, anodized …
- Suitable for freshwater.
Suitable for the following Volvo Penta engines/transmissions D6-370A-C D6-350A-A D6-350A-B D6-370D-E D6-370D-B D6-370A-F D6-370D-A D4-260A-B D4-260A-A D4-260A-C D4-260A-D D4-260A-E D4-260A-F D4-260D-B D4-260D-C D4-260D-D D4-260D-E D4-260D- …
Suitable for the following motor/gearbox types: 2/2.5/3.3HP 2-STROKE - 3.3 2/2.5/3.3 HP 2-STROKE - 2.5 2/2.5/3.3 HP 2-STROKE - 3.3 2/2.5/3.3HP 2-STROKE - 2 2/2.5/3.3HP 2-STROKE - 2.5 2/2.5/3.3HP 2-STROKE - 2.5
Suitable for the following motor/gearbox types: Mercury and Mariner 30 - 60 hp two-stroke outboards (except Lightning, BigFoot and Japanese productions) Mercury and Mariner 70 hp 3-cylinder - two-stroke outboard Mercury and Mariner 25 hp f …
YAMAHA SERVICE KIT F75/F90 (16&NEWER) + F80B/VF90 (ALL YEARS) + F115 (06&NEWER) 100HRS (8M0222222)
- Aufblasbar, mit Ventil - aus weißem PVC - vielseitig verwendbar - ideal als Einstiegshilfe aufs Boot oder als Heckfender um den Rumpf zu schützen.
Abmessung: 400x400x205mm
Be the first to review this product.
No reviews yet.
No questions yet.
- Inflatable, with valve - made of blue or white PVC - Versatile use Length: 400mm Width: 350mm Diameter: 100mm
- Inflatable, with valve - made of blue or white PV.
- Made of closed-cell PE foam -weatherproof - With mounting holes at all four corners - Can also be used as a seat pad.
The fender mat protects your boat from unnecessary damage and scratch marks - The PU-coated inside FPM protects the hull of your boat - The 4 mm thick cellular rubber core provides protection and flexibility - Protects the yacht over a lar …
- Inflatable, with valve - made of white PVC - Versatile use - ideal as a boarding aid on the boat or as a stern fender to protect the hull.
The cushion fender - long fender protects your boat from damage when mooring and casting off - With "Protector-Mat" for best protection - Highly tear-resistant polyester fabric ensures a long service life of the fender - The 27mm thick and …
-Inflatable - with valve - Made of white, signal red or yellow PVC
We will notify you by email when this item is back in stock.
You can unsubscribe from this notification at any time. Your email address will only be used for this notification.
Deutsch