Your cart is empty
JAMBO ANCHOR® This sets it apart from other anchors: Widely spaced flukes (1) prevent this Anchor tips to one side.
- Inexpensive heeling knife (clinometer) - Equipped with trim scale (0° to 5°) and coarse scale (0° to 45°) - Bowl tube filled with liquid - Motion-damped - Mounting through 4 holes - Material: transparent plastic.
Colour: black Material: Plastic Length: 496mm Inner Diameter: 30mm
- Replacement cartridge set for United Moulders vending machines.
- Simple design - cylindrical fender with eyes at both ends - Suitable for vertical and horizontal use
- Bottom plate complete for fixing the Porta Potti Qube toilet series to the bottom of the boat.
- Solid design with a frame made of 25 mm Ø aluminium tube - The white melamine table top is edged with an aluminium profile.
- The "eye-catcher" at the sailor's table - Solid cast brass - Stable. Material: Brass
- To increase slip resistance - Sieve the grit and then paint over it transparently - Consumption approx. 100-200 g/m² - Glass Beads 105-210 μ.
- Hinged bolt with locking lock for securing - AISI 304 stainless steel.
- High-quality plastic zippers - for boat tarpaulins, bags, etc. - divisible - white - width 35 mm.
- Basic mounting kit with two mounting bolts - Complete incl. seals - especially for EXTURN COMPACT The EX bow and stern thruster can be mounted and used on almost any boat with a length of 6 to 20 m, regardless of hull shape, type of prop …
Wax-based rust inhibitor for preserving all metals and stainless steel Temporary paint protection possible Protective wax forms a firmly adhering, water-repellent film with very good corrosion protection Does not attack paintwork, anodized …
- Suitable for freshwater.
Suitable for the following Volvo Penta engine/transmission types: DPH-D1 DPH-E TSK DPH-E TSK DPI-A DPI-A
- Nach R.I.N.A. geprüfter Kunststofftank - Farbe orange - incl. beweglichem Verlängerungsschlauch.
Be the first to review this product.
No reviews yet.
No questions yet.
Stainless steel immersion tube sensor for fuel 10-180 OHM measuring range
- For fixing the petrol tank or battery box - With 1.3 m long belt. Dimensions: 16x16x2cm
- Tank suitable for diesel and gasoline - Including connection socket for fuel line and tank vent - Connection for filler neck and mounting with separate accessories!
- Made of anodized aluminum with transparent container that can be removed for cleaning and filter cartridge replacement - Water drain plug - For 10mm fuel line - 110mm filter Ø - 190mm high - at 0.49 PSI pressure - 205 liters/h flow.
- Suitable for YAMAHA, MARINER and HONDA outboards from type BF8C.
- Suitable for SUZUKI and CHRYSLER engines.
- Especially with a long exhaust line, a particularly large water collector is necessary - Water that is in the exhaust pipe must not run back into the engine - The ideal solution for sailboats when the engine is not running and in heavy s …
We will notify you by email when this item is back in stock.
You can unsubscribe from this notification at any time. Your email address will only be used for this notification.
Deutsch