Your cart is empty
Allpa thermomagnetic fuse 135A
- Compact compass for construction - Removable by optional mounting plate - Ideal for small sports boats - Roses Ø 65 mm - 5° rose scaling.
- Cooling unit and evaporator as a package - Power consumption approx. 35 W - Cold room: max. 100 L at 50 mm PU with L-evaporator, max.
Single chamber self-priming diaphragm pump 12V for grey or bilge water. Shower drain, transfer or pumping - Flexible installation with 360-degree rotation connections - Quiet operation and low power consumption - Operation without filters.
- Fiberglass mat: Reinforcement mat for the production of laminates in combination with polyester resin - Fine glass fabric mat: light fabric, easy to work with and low additional weight - Glass mesh mat coarse: woven reinforcement mat wit …
- Polished brass with movable hooks. Base plate: 73x36mm
- Sturdy Velcro fastener for boat tarpaulins, canopies, sail bags - 25 m per roll.
- Very stable fender hook - With spring bolt - Chrome-plated brass or stainless steel.
- A bag made of waterproof nylon - With zipper and yellow straps - Storage dimensions approx. 60 x 35 x 40 cm - Bag contents: incl.
Wax-based rust inhibitor for preserving all metals and stainless steel Temporary paint protection possible Protective wax forms a firmly adhering, water-repellent film with very good corrosion protection Does not attack paintwork, anodized …
Electronic circuit board that enables even more precise control of the air pump Pressure sensors with an accuracy of 3-8 mbar Introduction of LED status and diagnostics for both the air pump and the power supply Position of the pressure sw …
Thanks to its additional air chamber , the Allroundmarin Vario 320 in red is the ideal choice for rescue organizations and fire departments as well as for professional diving operations. With its selectable floor design and robust construction, it offers maximum safety and reliability for critical water rescues and technical assistance.
Suitable for the following motor/gearbox types: 454 Mag MPI - 1998-01 (SN: OL010029 - OM024999) 5.7L Bravo - 1997-1999 (SN: OK001501-OL618999) 502 Mag MPI - 1998-2001 (SN: OL017000 - OM024999) 7.4L MPI - 1998-2001 (SN: OL010003-OM024330) 4 …
YAMAHA SERVICE KIT F75/F90 (16&NEWER) + F80B/VF90 (ALL YEARS) + F115 (06&NEWER) 100HRS (8M0222222)
Genuine Suzuki Maintenance Kit for DF2/DF2.5 Outboard Motor from 2012 onwards Content: 1x Impeller 1x Spark Plug 1x Shear Pin 1x Gasket 10x17x1.5 2x gasket drain plugs 1x Anode 1x O-ring 1x Pin 1x Panel Water Pump 1x Water Pump Gasket
Suitable for the following Volvo Penta engine/transmission types: TSK DP-E TSK DP-G MD21B DP-C1 DP-D1 DP-E SP-E DP-G AQD21B
- Plastic disc - Ø 50 mm - Suitable for wire ropes up to 5 mm.
- Suitable for salt water - Manufacturer: Tecnoseal
- Made of robust, black PVC.
Dimension: 2000x80x65mm
Be the first to review this product.
No reviews yet.
No questions yet.
The fender tension belt for pole fenders is the flexible attachment for all dolphin fenders - The tension belt set is for attaching the dolphin fender to the dolphin.
The dolphin fender protects the boat from damage when entering and exiting the box - the boat is NOT STOPPED when it comes into contact with the fender mat on the pole, but glides along the fender and thus remains fully controllable - the …
- Short multi-dock fenders for high protection of the boat - Concave flattened on the bridge side for mounting - The horizontal and vertical fastening results in a very stable design - Colour: white - Material: PVC.
- Ideal for protecting edges and corners on floating jetties - Simple and flexible installation - Soft, abrasion-resistant PVC - Colour: white or navy blue - Versions in straight and for 90° angles.
The dolphin hook can be easily stretched around any round or square dolphin with the dolphin strap - NO DRILLING, NO TOOLS - When changing berths, simply remove the dolphin hook - No damage to the dolphin - Extremely secure.
- Slim minidock fender for fixed mounting on jetties, pontoons or quay walls - Vertical mounting with eight holes - Can be bent in the middle (results in an edge length of 2 x 475 mm) - Resistant and elastic PVC - Color: white.
- Voluminous multi-dock fender for high protection of the boat - Concave flattened on the bridge side for mounting - The horizontal and vertical fastening results in a very stable design - Can be angled up to 90° for corner mounting - In t …
- Handy toilet brush for boats and motorhomes - With bracket for screwing to walls or bulkheads - Dimensions holder: L 110 x W 95 x H 150 mm.
We will notify you by email when this item is back in stock.
You can unsubscribe from this notification at any time. Your email address will only be used for this notification.
Deutsch